10 GbE technology enables a standard zero client solution


Virtualization trends in commercial computing offer benefits for cost, reliability, and 
security, but pose a challenge for military operators who need to visualize lossless imagery in real time. 10 GbE technology enables a standard zero client solution for viewing pixel-perfect C4ISR sensor and graphics information with near zero interactive latency.

Single board computer, 	Console server, Panel PC

For C4ISR systems, ready access to and sharing of visual information at any operator position can increase situational awareness and mission effectiveness. Operators utilize multiple information sources including computers and camera feeds, as well as high-fidelity radar and sonar imagery. Deterministic real-time interaction with remote computers and sensors is required to shorten decision loops and enable rapid actions. A zero client represents the smallest hardware footprint available for manned positions in a distributed computing environment. Zero clients provide user access to remote computers through a networked remote desktop connection or virtual desktop infrastructure. Utilizing a 10 GbE media network for interconnecting multiple computers, sensors, and clients provides the real-time performance and image quality required for critical visualization operations. The cost of deploying a 10 GbE infrastructure is falling rapidly and 10G/40G has become the baseline for data center server interconnect. Additionally, deploying common multifunction crew-station equipment at all operator positions brings system-level cost and logistics benefits. The following discussion examines the evolution to thinner clients and the path to a real-time service-oriented architecture, in addition to looking at zero client benefits and applications.

…..

Posted in Panel PC, single board computer | Tagged , , | Leave a comment

Acrosser at International Exhibition Center

Single board computer, Industrial pc, Console server

acrosser Technology announces our participation in 2013 the Embedded Systems Expo and Conference (ESEC) from May 8th to the 10th. The event will take place at the Tokyo International Exhibition Center in Tokyo, Japan. We warmly invite all customers to come and meet us at the west hall, booth number: WEST 10-61.Contact:

http://www.acrosser.com/inquiry.html

Posted in Industrial PC, single board computer | Tagged , , | Leave a comment

Gaming guru has it…

Single board computer, Industrial pc, Console server

single board computer, Industrial pc, Console server

Matthew McAlonis, development gaming platform engineering manager at TE Connectivity, mentioned the connector needs for critical systems from the connector supplier perspective. He listed several needs that his design teams address during the development of connectors. Many of these needs directly address the challenges; for instance, optimizing the weight of connectors has a direct impact on the SWaP requirements faced by system architects (Figure 2). Though gaming platform may be small, it is very additive with the use of many connectors in a typical platform. A few grams here and there add up very quickly in a large system.

refer to: http://vita-technologies.com/articles/connect-trends-challenges-solutions-advancing-performance/

Posted in Industrial PC, single board computer | Tagged , , | Leave a comment

Embedded open source market

Single board computer, Console server, Panel PC

single board computer, Console server, Panel PC

Embedded platform distributions – Prix fixe meals

If the organization has already committed to a prepackaged embedded platform distribution – a commercial or community-based Linux tool kit, an Android SDK, or equivalent – then engineers already have a library of applications, middleware, and utilities at their fingertips. Embedded distributions typically comprise 250 to 500 packages, with each package containing one or more unique, ready-to-use pieces of project code. Unlike downloading code directly from project sites, embedded distributions and SDKs usually include prebuilt versions of project code, tested and vetted for integration compatibility across packages. In many cases, these versions might not be the latest and greatest, and developers might need to turn to the original project sites to access the more current features and bug fixes. However, switching to newer versions of projects, while attractive, can break compatibility with other code in your stack, and also fall outside Service-Level Agreements (SLAs) from commercial suppliers.

Evaluating options, refining the OSS palate

Finding potentially useful code represents only half the challenge. Developers must also vet discovered code across a variety of parameters to determine if it is technically and legally viable. Factors to consider include code size, language, and quality; community history and dynamics; software licensing; and provenance.

 

refer to: http://embedded-computing.com/articles/eating-open-source-buffet/#at_pco=cfd-1.0

Posted in Panel PC, single board computer | Tagged , , | Leave a comment

Under increasing pressure to boost network capacity

 IT managers are under increasing pressure to boost network capacity and performance to cope with the data deluge. Networking systems are under a similar form of stress with their performance degrading as new capabilities are added in software. The solution to both needs is next-generation System-on-Chip (SoC) communications processors that combine multiple cores with multiple hardware acceleration engines.

In-Vehicle Computer. single board computer, Industrial PC

refer:http://embedded-computing.com/articles/next-generation-architectures-tomorrows-communications-networks/

Posted in Industrial PC, single board computer | Tagged , , | Leave a comment

The speed of innovation in automotive IVI is making a lot of heads turn

Single board computer, Panel PC, networking appliance

The speed of innovation in automotive IVI is making a lot of heads turn. No question, Linux OS and Android are the engines for change.

The open source software movement has forever transformed the mobile device landscape. Consumers are able to do things today that 10 years ago were unimaginable. Just when smartphone and tablet users are comfortable using their devices in their daily lives, another industry is about to be transformed. The technology enabled by open source in this industry might be even more impressive than what we’ve just experienced in the smartphone industry.

 The industry is automotive, and already open source software has made significant inroads in how both driver and passenger interact within the automobile. Open source stalwarts Linuxand Google are making significant contributions not only in the user/driver experience, but also in safety-critical operations, vehicle-to-vehicle communications, and automobile-to-cloudinteractions.

 

 

 

 

 

Single board computer, Panel PC, networking appliance
 
Figure 1: Software complexity in IVI systems continues to grow. Today, the IVI system of an S-Class Mercedes has 100m lines of code. By 2015, it is expected to be 300m. A Linux-based solution, capable of scaling to handle the complexity, is mandatory.

 

 

 

Single board computer, Panel PC, networking appliance
Figure 2: An example of smartphone in-dash tethering: Drivers use the same smartphone apps in the vehicle as they do on their own smartphone, which provides a great deal of familiarity.

Single board computer, Panel PC, networking appliance

Figure 3: There are several ways to include Android (Android apps) in a Linux-based IVI solution. One method, which is becoming increasingly more popular, is using Linux Container Architecture. Here, Android sits as a guest OS on top of the Linux kernel. Privileges and permissions are tightly controlled.

refer:http://embedded-computing.com/articles/automotive-source-drives-innovation/

 

 

 

 

 

Posted in Panel PC, single board computer | Tagged , | Leave a comment

How about new dimension in operating systems?

Single board computer, Industrial pc, Console server

Given the increased complexity of processors and applications, the current generation of Operating Systems (OSs) focuses mostly on software integrity while partially neglecting the need to extract maximum performance out of the existing hardware.

Processors perform as well as OSs allow them to. A computing platform,  or otherwise, consists of not only physical resources – memory, CPU cores, peripherals, and buses – managed with some success by resource partitioning (virtualization), but also performance resources such as CPU cycles, clock speed, memory and I/O bandwidth, and main/cache memory space. These resources are managed by ancient methods like priority or time slices or not managed at all. As a result, processors are underutilized and consume too much energy, robbing them of their true performance potential.
1.An advanced performance management solution

2.Extending to more dimensions

3.Implementation on VMX Linux

4.Benchmarks show the results

refer:

http://embedded-computing.com/articles/performance-management-new-dimension-operating-systems/

Posted in Industrial PC, single board computer | Tagged , | Leave a comment

About embedded industry M2M

Industrial PC, Console server, Panel PC

Machine-to-Machine (M2M) communications strategies and cloud computing are transforming industrial interconnects from an assortment of fragmented, proprietary technologies to open standards easily integrated into new designs. This new direction in M2M connectivity enables a wide range of applications and services by exchanging real-time data between remote devices, one or more central servers, and authorized third parties.

M2M technology allows embedded design teams to contain costs, improve security, enable remote management, and maximize system availability. The major goal of M2M communications is to combine real-time data from remote devices with enterprise applications to automate everyday company decisions and thus optimize industrial output and lower operating costs.

In this issue of Industrial Embedded Systems, we asked contributors to take a look at the networking, sensing, and computing issues affecting embedded design for industrial applications. For example, Mike Ueland, senior VP and general manager at Telit Wireless Solutions North America, describes the benefits and cost savings associated with M2M connections for remotely monitoring and managing assets. Mike outlines several good reasons to support an M2M industrial application based on cellular technology. In an in-depth interview covering intelligent networking technologies, Tom Barber, director of marketing at Silicon Labs, presents a new wireless microcontrollerproduct that fulfills the requirements of embedded applications with RF connectivity. Tom also highlights the new capabilities offered in low-power mesh networks resulting from Silicon Labs’ acquisition of Ember Corporation. Expanding the discussion, Shaye Shayegani, senior field applications engineer at Lantronix, answers questions on the security and adaptability of industrial networking modules. Shaye addresses the major connectivity challenges that industrial customers are dealing with right now.

Changing the subject to the sensitivity and stability of brushless DC motors in industrial applications, Honeywell Sensing and Control’s Joshua Edberg, senior global marketing manager in the Magnetic Sensors division, and Fred Hintz, engineering manager in the Speed and Position Sensors division, dispel three myths of chopper stabilization techniques. Covering another topic essential to factory settings, Karim Wassef, director of DC-DC product line management at GE Energy’s Power Electronics division, answers questions about the power sources available to operate in hostile conditions such as extended temperatures or corrosive environments. In a software-related topic, Doug Jones and Brian McKay, marketing managers at MathWorks, cover the advantages Model-Based Design offers for complex industrial control systems, allowing users to simulate, test, and debug circuitry before committing it to hardware.

refer:

http://industrial-embedded.com/articles/embedded-upgrades-m2m-networks/

Posted in Industrial PC, Panel PC | Tagged , | Leave a comment

Knowing how to manage the IP selection process can help engineers effectively meet objectives and reduce risk

Single board computer, Console server, Panel PC

single board computer, Console server, Panel PC

As digital design has proliferated the electronics world, making designs faster, easier to test, and more robust, the analog portion of embedded designs is becoming a bottleneck. To meet requirements and timetables in the analog portion, engineers generally have three weapons at their disposal: utilize peripheral analog IC, build the functionality internally (make), or purchase the IP block from an external vendor (buy). Each option has its own merits and drawbacks, but none can launch a competitive advantage better or cause more frustrating confusion than analog IP.

Traditionally, these options only apply to ASIC builds, as FPGAs are not compatible with analog IP. However, this is changing quickly. Some IP companies now provide all Register Transfer Language (RTL)-based Analog-to-Digital Converter (ADC), Digital-to-Analog Converter (DAC), DC-DC converter controller, and clocking functions with robust performance.

To meet design objectives, engineers must understand the IP vendor’s strategy and incentives and match their offerings to what is required.

 

Refer:

http://embedded-computing.com/articles/understanding-analog-cores-embedded-computing-needs/v

Posted in Panel PC, single board computer | Tagged , | Leave a comment

Acrosser in 2013 embedded world Exhibition&Conference

Single board computer, Console server, Panel PC

The embedded world Exhibition&Conference is the world’s biggest exhibition of its kind and the meeting-place of the international embedded community. Embedded technologies are in action everywhere – whether in the car, data and telecommunication systems, industrial and consumer electronics, military systems or aerospace. 872 exhibitors showed 22,262 qualified visitors the full range of products for embedded technologies in 2012: hardware, software, tools, services and lots more.

Embedded world, the biggest and most important event of its kind, opens the series of high-tech exhibitions and knowledge-packed events at the Nürnberg venue from 26–28 February 2013. This event sets standards and records every year – now for the eleventh time in 2013. Exhibitors from all over the world present the entire spectrum of embedded systems: hardware, software, tools and services.

Acrosser ——> Booth Hall 2 2-519

 

refer:
http://www.embedded-world.de/en/press/

Posted in Panel PC, single board computer | Tagged , , | Leave a comment